The Code of Federal Regulations of the United States of AmericaU.S. Government Printing Office, 1975 The Code of Federal Regulations is the codification of the general and permanent rules published in the Federal Register by the executive departments and agencies of the Federal Government. |
Otras ediciones - Ver todas
Términos y frases comunes
amended by CGFR applicable approved ASME Code assigning authority bilge boiler brazing breadth bulkhead cargo chapter Class coamings coastwise Commandant comply deck line depth exceed exempted feet fitted flanges fluid freeboard deck freeing ports Fusible plugs gage gross tonnage gross tons hatchways heat home port hydrostatic test installed joints July 12 June 17 length less load line certificate load line marks loadline machinery space marine document Marine Inspection material maximum allowable ment minimum modified mortgage Officer in Charge openings operating owner paragraph passenger vessel percent piping systems pounds per square pressure vessels pump radiography regulations relief valve rhumb line safety valve sels sheer ship side specific specimens square inch steam steel subchapter subdivision load lines Subpart superheater Table tanks temperature test plates thickness timber tion tonnage deck tonnage mark tube U.S. Coast Guard United upper edge voyages welded
Pasajes populares
Página 333 - The controlling interest in a corporation shall not be deemed to be owned by citizens of the United States (a) if the title to a majority of the stock thereof is not vested in such citizens free from any trust or fiduciary obligation in favor of any person not a citizen of the United States...
Página 75 - The disc, lines and letters are to be painted in white or yellow on a dark ground or in black on a light ground.
Página 225 - ... minimum, either by making each discharge serve for as many as possible of the sanitary and other pipes, or in any other satisfactory manner.
Página 27 - If the exposed freeboard deck Is sheathed; where: T Is the mean thickness of the exposed sheathing clear of deck openings; and S is the total length of superstructures as defined In paragraph (j)(4) of this section. (2) The depth for freeboard (D...
Página 356 - ... (3) An affidavit is filed with the record of such mortgage to the effect that the mortgage is made in good faith and without any design to hinder, delay, or defraud any existing or future creditor of the mortgagor or any lienor of the mortgaged vessel...
Página 112 - Upon the expiration of the certificate renewal must be obtained as provided by the Load Line Regulations and the certificate so endorsed. Endorsement should also be made in the spaces provided on the occasion of each annual inspection required by the Load Line Regulations.
Página 331 - Provided further, That no vessel of more than five hundred gross tons which has acquired the lawful right to engage in the coastwise trade...
Página 332 - States, and, in the case of a corporation, unless its president or other chief executive officer and the chairman of its board of directors are citizens of the United States...
Página 331 - States, and which has later been rebuilt, shall have the right thereafter to engage in the coastwise trade, unless the entire rebuilding, including the construction of any major components of the hull or superstructure of the vessel, is effected within the United States, its Territories (not including trust territories), or its possessions...
Página 353 - C. (a) No sale, conveyance, or mortgage which, at the time such sale, conveyance, or mortgage is made, includes a vessel of the United States, or any portion thereof, as the whole or any part of the property sold, conveyed, or mortgaged shall be valid, in respect to such vessel, against any person other than the grantor or mortgagor, his heir or devisee, and a person having actual notice thereof, until such bill of sale, conveyance, or mortgage is recorded in the office of the collector of customs...