Imágenes de páginas
PDF
EPUB
[blocks in formation]

Cordeau detonant fuse... Mild detonating fuse, metal clad.

Cordeau detonant fuse is a
fuse containing a core of
pentaerythrite tetranitrate
or cyclotrimethylene trini-
tramine not exceeding 400
grains per linear foot, over-
spun with tapes, yarns and
plastics or waterproofing
compounds. Wire counter-
ing is permissible.
Mild detonating fuse, metal
clad, consists of a core con-
taining not more than 211⁄2
grains of high explosives
composition per lineal foot,
clad with metal with or
without a covering of tapes,
yarns, plastics or water-
proofing compounds.
Do not stow in the same com-
partment with inflammable
liquids, inflammable solids
and oxidizing materials, cor-
rosive liquids or inflam-
mable compressed gases.
Each outside container must
be plainly marked: "Cor-
deau Detonant Fuse-Han-
dle Carefully" or "Mild
Detonating Fuse, Metal
Clad-Handle Carefully" as
the case may be.

Explosive auto alarms.... Explosive auto alarms are

Cigarette loads.....

Trick matches..

Trick noise makers...

tubular devices containing a small amount of explosive composition and igniting compound which is ignited by an electric spark. Cigarette loads consist of wooden pegs to which are affixed a small amount of explosive composition. Trick matches are matches which have small amounts of explosive or pyrotechnic composition affixed to the match stem just below the match head.

[blocks in formation]

Trick noise makers, explosive, No label required. consist of spheres containing

a small amount of explosive

composition.

Do not stow in the same hold or compartment with inflammable liquids, inflammable solids or oxidizing materials, corrosive liquids or inflammable compressed gases. Each outside container shall be plainly marked "Explosive Auto Alarms-Handle Carefully" "Cigarette loads-Handle Carefully" "Trick matches-Handle Carefully" or "Trick noise makers-Handle Carefully" as appropriate.

"On deck under cover." "Tween decks readily accessible."

"Under deck away from heat." Outside containers:

Wooden boxes (ICC-15A, 15B, 16A, 19A) not over 150 lb. gr. wt. Fiberboard boxes (ICC-12B) not over 65 lb. gr. wt.

[blocks in formation]
[blocks in formation]

of a metal device containing a knife-edged component which is propelled by a small charge of an explosive compound. Explosive power devices, Class C, are devices designed to drive generators or mechanical apparatus by means of propellant explosives, Class B. The devices consist of a housing with a contained propellant charge and an electric igniter or squib.

Explosive release devices. Explosive release devices con

Starter cartridges, jet engine, Class C.

sist of a rod or link fitted with means for mechanica attachment to other apparatus or equipment and containing a small electrically initiated explosive charge which will break the rod or link upon functioning. Starter cartridges, jet engine, Class C, consist of a metal, plastic and/or rubber case each containing a pressed cylindrical block of flammable solid material and having in the top of the case a small compartment that encloses an electric squib, small amount of black powder and/or smokeless powder which constitute an igniter. The starter cartridge is used to activate a mechanical starter for jet engines. Do not stow in the same compartment with inflammable liquids, inflammable solids and oxidizing materials, corrosive liquids or inflammable compressed gases.

Each outside container must be plainly marked "Explosive Cable Cutters," "Explosive Power Devices, Class C," "Explosive Release Devices," or "Starter Cartridges, Jet Engine, Class C." and "Handle Carefully-Keep Fire

Away."

Cargo vessel

No label required.. Stowage:

No label required.

No label required.

"

"On deck under cover." "Tween decks readily accessible."

"Under deck away from heat." Outside containers:

Strong wooden or metal boxes, not over 150 lb. gr. wt. Fiberboard boxes (ICC-12H, 23F, 23H) not over 65 lb. gr. wt.

No label required.. NOTE 1: Starter cartridges, jet en

gine, must have igniter wires short-circuited when packed for shipment.

[blocks in formation]

Descriptive name of article

Explosive rivets.------

Fire extinguisher actuating cartridges.

Table C-Classification: Class C:

Label required

Required conditions for transportation

Cargo vessel

Characteristic properties, cautions, markings required

Metal rivets, each containing not more than 375 milligrams of explosive composition placed in one end. Do not stow in same compartment with inflammable liquids, inflammable solids and oxidizing materials, corrosive liquids or inflammable compressed gases.

Each outside container will be plainly marked: "Explosive rivets."

Used to actuate the valves on remotely controlled fire extinguishers.

Do not stow in the same compartment with inflammable liquids, inflammable solids or oxidizing materials, corrosive liquids or inflam. mable compressed gases. Each outside container must be plainly marked "Fire Extinguisher Actuating Cartridges-Handle Carefully."

[blocks in formation]
« AnteriorContinuar »