Procedure should be made a part of the application. The application shall be filed on or before the last day of the month following the close of the short period for which a return is required to effect the change of accounting period. A copy of the application must be attached to the return filed for the short period. .02 Unless a letter is received by the trustee or co-trustee from the Internal Revenue Service denying permission because the Form 1128 is not timely filed, it may be assumed that the change has been granted provided the trustee or co-trustee has complied with all of the provisions of this Revenue Procedure. Trustees or co-trustees complying with the provisions of the Revenue Procedure will be deemed to have obtained the approval of the Commissioner of Internal Revenue for a change in accounting period of the trust. SEC. 4. CONDITION. The taxable income of the trust, if any, shown on the short period return must be placed on an annual basis and the tax computed in accordance with the provisions of section 443 (b) of the Internal Revenue Code of 1954 and the regulations thereunder. SEC. 5. LIMITATION. For purposes of this Revenue Procedure, where the change in taxable year of the trust results in a deferral of income, the amount deferred must not exceed $5,000. SEC. 6. TRUSTS NOT COVERED BY THIS PROCEDURE. This Revenue Procedure does not apply to (i) trusts whose annual accounting period has been changed at any time within the ten calendar years ending with the calendar year which includes the beginning of the short period required to effect the change of annual accounting period; or (ii) inter vivos trusts in which the beneficiary is also the grantor. In such cases, applications must be filed on Form 1128 with the Commissioner in accordance with section 1.442-1 (b) (1) of the regulations. SEC. 7. EFFECTIVE DATE. This Revenue Procedure is effective on November 25, 1968, the date of publication in the Internal Revenue Bulletin. SEC. 8. INQUIRIES. Inquiries in regard to this Revenue Procedure should refer to its number and be addressed to the Commissioner of Internal Revenue, Attention: T:I:C:1: AM&P, Washington, D.C., 20224. Substitutes for Form 1087, Nominee's Information 26 CFR 601.602: Forms and instructions. SECTION 1. PURPOSE. Rev. Proc. 68-42 The purpose of this Revenue Procedure is to state the requirements of the Internal Revenue Service relating to substitutes for Form 1087, Nominee's Information Return. SEC. 2. SUBSTITUTE FORMS. Substitutes for Form 1087 which adhere to the specifications contained in this procedure may be privately printed without the prior approval of the Internal Revenue Service. Proposed substitutes not meeting these specifications should be submitted to the Service for approval. Requests for approval should contain an explanation of the need for the specific deviations sought. SEC. 3. FORMAT SPECIFICATIONS. .01 For purpose of format specifications, the Form 1087 is divided into two sections: a specified format section and a variable format section. The specified format section includes the payment blocks, name, address, and identifying number of the actual owner or payee, the format identifier (sec. 3.04(j)), the format guidelines, and the area within three-eighths inch of the left edge of the document and one-eighth inch to the right of the format identifier. The variable format section consists of the remainder of the document, including the reporting year and name, address, and identification number of the nominee or record owner. .02 Additional data blocks (including additional payment blocks) may be added to substitute Forms 1087, at the option of the nominee, or in accordance with State requirements, but these additional data blocks must be contained in the variable format section except as noted in section 3.04 (c). .03 Variable format section layout. The arrangement of data in the variable format section may be varied on substitute forms to fit the requirements of State law or to accommodate the data processing system used by the nominee, except that the payment year must always be on the top line of the form, subject to section 3.04 (h) below. .04 Specified format section layout. (a) The specified format section, including contents, general arrangement, and typography, must conform to one of the formats illustrated in Exhibit B. Formats 1, 2, 3, 4, and 5 are preferred; however, formats 6 and 7 are also acceptable. (b) If format 6 or 7 is used, and the location of the taxpayer identifying number is consistent, a 3-point vertical rule (0.045 inch) should be preprinted immediately to the left of this number. If format 6 or 7 is used and the location of the taxpayer identifying number is not consistent for all returns, due to the nature of the mechanical equipment used by the nominee, this number need not be contained in a special box, nor identified. Preferably, it should be printed to the right of and on the same line as the name of the actual owner or payee (or first line of the payee name if there is more than one) but it can also be printed one or two lines above or below the first line of payee name. (c) Special precaution must be taken if the printing of an account designation number in the specified format section is unavoidable. In this case such number must not be on the same line as, or on any line above, the taxpayer identifying number, nor on the same line as payments. When possible, the printing of such numbers in the specified format section should be avoided. (d) If the taxpayer identifying number is a social security number, it must be printed in the following pattern: 000-00-0000. If it is an employer identification number, it must be printed as 00-0000000. Spaces may be used in lieu of hyphens. (e) When there are multiple payees with different surnames, the identifying number shown must be linked to the surname to which it applies. It is preferred that such linkage be in the form of an asterisk preceding the designated surname. (f) Payee name, street address, and city and State (including ZIP Code) must be on separate lines. City, State, and ZIP Code may be on the same line or on separate lines. (g) The area within three-eighths inch of the left edge of the document (exclusive of stubs) must not contain any prepunched holes and be free of any printing except for the format identifier and format guidelines appropriate to each permissible alternate format as illustrated in Exhibit B. There must be no intervening data or marks between the left edge of the document and the specified format section. In addition, there must always be a clear space of at least one-eighth inch to the right of and below the format identifier. (h) There must be a margin of at least one-fourth inch from the top edge of the document to any printing. (i) The overall dimensions of the specified format section and the dimensions of the individual data blocks contained therein may be varied from the dimensions shown in Exhibits A and B. However, the general arrangement of data within the section and the typography may not be altered. (j) The appropriate format identifier (1, 2, 3, 4, 5, 6, or 7) must be shown in the upper left corner of Copy Á, as illustrated in Exhibits A and B, one-fourth inch from the top and left edges. In addition, the appropriate format guidelines must also be shown on Copy A. The identifier and guidelines need not be shown on the other copies of the form. (k) In using any of the formats, care should be taken to prevent disclosure of payment information if a window envelope is used for mailing. SEC. 4. SPECIFICATIONS. Basic form.-The latest revision of the prescribed Form 1087 should be used as the basis for the privately printed form. A copy of the latest revision of this form may be obtained from any District Director of Internal Revenue. .02 Color and quality of paper. (a) Paper for Copy A must be white chemical wood bond, or equivalent, 32- to 40-pound (basis 17 x 22-1000), plus or minus 5%. The above paper must consist of principally bleached chemical woodpulp and free from unbleached or ground woodpulp. It also must be suitably sized for writing on with ink without feathering. (b) The paper used for the other copies must be white, at least 18-pound (basis 17 x 22-1000). .03 Color and quality of ink.-All printing must be in a high quality black ink. Bar codes should be free from picks or voids. 04 Quality of printing.-Printers must maintain strict quality control during production of substitute Forms 1087. Strict observance of printing and trimming tolerances is required. .05 Typography.-Type must be substantially identical in size and shape with corresponding type on the official form. All horizontal rules on the document and all vertical rules outside the specified format section must be 1 point (0.015 inch). All vertical rules within the specified format section and format identifier lines must be 3-point (0.045 inch). When present, mailing guides must be less than one-half point (0.0075 inch). A 0.045-inch vertical rule must precede and follow each payment block, as illustrated in Exhibits A and B. The format identifier must be printed in a 10-point Roman font. Any normally used Roman font is acceptable. Vertical rules must be parallel to the left edge of the document; horizontal rules, parallel to the top edge. .06 Dimensions.-The official form is 8 inches wide by 311⁄2 inches deep, exclusive of a 1/2-inch snap-stub on the left side of the form. The substitute forms may vary in width from 7% inches to 8 inches and in depth from 314 inches to 334 inches, although adherence to the size of the official form is preferred. The snap feature is not required on substitutes. If the substitute forms are in continuous or strip form, they must be burst and stripped to conform to the size specified before they are filed. .07 Clear area. The back of Copy A must be free of all printing. .08 Carbonized forms or "spot carbons."-Carbonized forms and "spot carbons" are not permissible. Interleaved carbon, if used, should be black and of good quality to preclude smudging. .09 Printers symbols.-The Government Printing Office symbol must not be placed on substitute Forms 1087. In place thereof, it is suggested the forms printer print his Employer Identification Number in the same place on such substitute forms. .10 Copies B and C.-Copies B and C are included in the official assembly for the convenience of the nominee. Although there is no requirement that privately printed substitute forms include these copies, Copy B may be desired by the nominee for his records and Copy C will satisfy the requirements of law and regulations concerning the statement of information which is to be furnished to the actual owner or payee. SEC. 5. ADDITIONAL INSTRUCTIONS. .01 Arrangements of assembly.-Except as provided in paragraph .02 below, the parts of the assembly shall be arranged, from top to bottom, as follows: Copy A, "For Internal Revenue Service," Copy B, "For Nominee," Copy C, "For Actual Owner or Payee." .02 Additional copies.-Additional copies may be prepared by nominees for States requiring the report. When this is done, one such copy may be inserted between Copies A and B. Forms for delivery to State or local taxing authorities should be clearly labeled to indicate the purpose for which they are intended and should not bear any part of the designation, "Form 1087, U.S. Treasury Department, Internal Revenue Service." .03 Instructions for nominees. (a) Only originals or ribbon copies may be filed with the Service. Carbon copies are not acceptable. (b) The Service requests the cooperation of nominees in typing or machine printing whenever possible and in providing good quality data entries on the forms; i.e., using a black ribbon, in serting data in the middle of blocks, well separated from other printing and guidelines, and taking any other measures that will guarantee a clear, sharp image. However, nominees are not expected to purchase typewriters, machines, or special ribbons to prepare the forms. (c) Corrected returns Form 1087 must be submitted in accordance with instructions on Exhibit C. SEC. 6. SUBSTITUTES NOT MEETING ABOVE CONDITIONS. Proposed substitute forms which do not meet the conditions stated above, and requests for submission of Forms 1087 in the form of tabulating cards should be forwarded by letter to the Commissioner of Internal Revenue, Attention: D:S:E, 1111 Constitution Avenue, N.W., Washington, D.C., 20224. Requests for submission of magnetic tape should be forwarded to the appropriate Service Center. SEC. 7. REPRODUCTION PROOFS. Order blanks for reproduction proofs are mailed annually to requesters of record and, on request, to other users. Printers and others wishing to obtain reproduction proofs may send their requests to the Commissioner of Internal Revenue, Attention: A:FM:P, 1111 Constitution Avenue, N.W., Washington, D.C. 20224. A charge of $0.75 per page will be made for each reproduction proof regardless of page size. Învoices will be mailed after orders have been filled. SEC. 8. EFFECT ON OTHER DOCUMENTS. This Revenue Procedure supersedes Revenue Procedure 67-22, C.B. 1967-1, 611. |