Imágenes de páginas
PDF
EPUB

64

(b) The tolerance established in this sion is less than the standard dimenpart for the dimension specified as "ef- sion. fective diameter of head" shall be ap- (a) The standard dimensions of a barplied as follows on the various types of rel for fruits, vegetables, and other dry barrels and subdivisions in use;

commodities other than cranberries, (1) When a barrel or subdivision and of a barrel for cranberries, with thereof has two heads, the tolerance which the actual measured dimensions shall be applied to the mean of the av. are to be compared, are as follows: erage diameters from inside to inside of staves at the inner edges of the

Barrel for

fruits, vegetaheads.

Barrel

bles, and other

Dimensions (2) When a barrel or subdivision

dry commod

for cran ities other than

berries thereof has but one head and a croze

(inches)

cranberries ring or other means for the insertion of

(inches) a head at the opposite end, the toler

Diameter of head

17%

16/4 ance shall be applied to the mean of Ettective diameter of head (see the average diameters, one taken from $ 241.4) ...........

1644 157% Distance between heads .........

26

2544 inside to inside of staves at the inner

Circumference of bulge, outside edge of the head, the other from inside

measurement ........

5897 to inside of staves at the inner edge of Length of stave ..............

28112 2812 the croze ring, or from inside to inside of staves at a point where the inside (b) In the case of all subdivisions of surface of a head would come were such the barrel for fruits, vegetables, and head inserted in the barrel.

other dry commodities other than (3) When a barrel or subdivision cranberries, and all subdivisions of the thereof has but one head and no croze barrel for cranberries, the following diring or other means for the insertion of mensions are hereby standardized for a head at the opposite end, the toler the purpose of the application of tolerance shall be applied to the mean of ances, and the actual measured dimenthe average diameters, one taken from sions are to be compared with these:

SUBDIVISIONS OF BARREL FOR FRUITS, VEGETABLES, AND OTHER edge of the head, the other taken from

DRY COMMODITIES OTHER THAN CRANBERRIES inside to inside of staves at a point 1%8

3/4 barrel | 12 barrel

Dimensions inches from the end of the staves in the

a barrel

(inches) (inches) (inches) case of a barrel or 3/4 barrel, or at a

Efective diameter of point 1 inch or 7 inch from the end of

head (see & 241.4)

1514 13%

115 the staves in the case of a 1/2 barrel or Distance between heads 2312 2012

18 1/3 barrel, respectively.

Circumference of bulge,

outside measurement (c) The standard allowance for depth

58172

4544

5112 of croze ring shall be 3/16 inch. There

SUBDIVISIONS OF BARREL FOR CRANBERRIES fore, the standard "effective diameter of head” in the case of the standard Effective diameter of barrel is 1634 inches and in the case of

head (see 241.4) .... 14%

125% the standard cranberry barrel is 1578

Distance between heads

20

17h

Circumference of bulge, inches.

outside measurement

5338 47

41% 8 241.5 Standard dimensions.

(Sec. 1, 38 Stat. 1186; 15 U.S.C. 234) Whenever in the rules and regulations in this part the error on a dimension is mentioned, this error shall be 8241.6 Classes of barrels for tolerance determined by taking the difference be

application. tween the actual measured dimension For the purpose of the application of and the standard dimension. The error tolerances, barrels for fruits, vegetais an error in excess and is to be pre bles, and other dry commodities other ceded by a plus sign when the measured than cranberries, are hereby divided dimension is greater than the standard into two classes as follows: dimension. The error is an error in de- (a) Class 1 shall include (1) all barrels ficiency and is to be preceded by a no dimension of which is in error by minus sign when the measured dimen- more than the following amounts, and

er

[ocr errors]

23

112

14

VA

1/2

(2) all barrels one or more of the di- (or 5/3). Then add this result to the mensions of which are in error by more error on the circumference of bulge althan the following amounts, and which gebraically. If the result obtained is in addition have no dimension in error not greater than the tolerance given in the opposite direction:

above, then the barrel is within the tol

erance allowed; if the result is greater Error, inches

than this tolerance, then the barrel is

not within the tolerance allowed. Effective diameter of head ....

NOTE: To find the algebraic sum of a numDistance between heads .... Circumference of bulge, outside measurement ..

ber of quantities having different signs, first

add all those having one sign; then add all (b) Class 2 shall include all barrels at

those having the opposite sign; then subtract least one dimension of which is in error

the smaller sum from the larger, giving this

result the sign of the larger quantity. by more than the amounts given above,

(2) (Reserved] but which in addition have at least one

(c) The tolerance to be allowed in exdimension in error in the opposite di

cess or in deficiency on the dimensions rection. (This class includes all barrels

of all barrels for cranberries shall be as mentioned in section 1 of the law in the

follows: proviso reading: Provided, That any barrel of a different form having a ca

Tolerance, pacity of seven thousand and fifty-six

inches cubic inches shall be a standard bar

Diameter of head ......... rel.")

Effective diameter of head .......

Distance between heads (Sec. 1, 38 Stat. 1186; 15 U.S.C. 234)

Circumference of bulge, outside measurement ..

138

Length of stave ... 8241.7 Tolerances to be allowed. (a) The tolerances to be allowed in

(1) If no dimension of a barrel for excess or in deficiency on the dimen

cranberries is in error by more than sions of all barrels of Class 1 shall be as

the tolerance given above, then the follows:

barrel is within the tolerance allowed.

(2) If one or more of the dimensions Tolerance of a barrel for cranberries is in error by inches

more than the tolerance given above, Diameter of head ........

14 then the barrel is not within the tolerEffective diameter of head .......

ance allowed. Distance between heads ....

(d) The tolerances to be allowed in Circumference of bulge, outside measurement ..

11/2 Length of stave .........

excess or in deficiency on all subdivi

sions of the standard barrel for fruits, (1) If no dimension of a barrel of vegetables, and other dry commodities Class 1 is in error by more than the tol other than cranberries, and on all suberance given above, then the barrel is divisions of the standard barrel for within the tolerance allowed.

cranberries, shall be the values given (2) If one or more of the dimensions in the following table, and these tolerof a barrel of Class 1 is in error by more ances are to be applied to the result obthan the tolerance given above, then tained by the application of the folthe barrel is not within the tolerance lowing rule: allowed.

(1) Having determined the errors on (b) The tolerance to be allowed in ex- each dimension and given to each its cess or in deficiency on all barrels of proper sign (see § 241.5), add the errors Class 2 shall be 142 inches (1.5) inches, on the effective diameter of head and and this tolerance is to be applied to the distance between heads algebrathe result obtained by the application ically and multiply the result by 1.67 of the following rule:

(or 5/3). Then add this result to the (1) Having determined the errors of error on the circumference of bulge aleach dimension and given to each its gebraically. If the result obtained is proper sign (see § 241.4), add the errors not greater than the tolerance given in on the effective diameter of head and the following table for the proper subthe distance between heads algebra- division, then the barrel is within the ically and multiply the result by 1.67 tolerance allowed; if the result is

1/2

[merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][ocr errors][merged small][merged small][merged small][merged small]

3/4 barrel ...... 12 barrel.

[blocks in formation]

$255.2 Qualifications.

Each applicant selected for a fellow

PART 255—FELLOWSHIPS IN LAB.

ORATORY STANDARDIZATION AND TESTING FOR QUALIFIED CITIZENS OF OTHER AMERICAN REPUBLICS

Sec.
255.1 Type of fellowships.
255.2 Qualifications.
255.3 Award of fellowships.
255.4 Allowances and expenses.
255.5 Progress reports.
255.6 Duration of fellowships.
255.7 Official notification.

AUTHORITY: R.S. 161; sec. 1, 53 Stat. 1290; 22 U.S.C. 501.

SOURCE: 13 FR 8374, Dec. 28, 1948, unless otherwise noted.

(a) A citizen of an American republic other than the United States;

(b) In possession of a certificate of medical examination issued by a licensed physician within 60 days of the date of application, describing the applicant's physical condition and stating that he is free from any communicable disease, physical deformity or disability that would interfere with the proper pursuit of training, research, or any other activity or work incident to the fellowship;

(c) Able to speak, read, write and understand the English language;

(d) Of good moral character and possessing intellectual ability and suitable personal qualities; and

(e) In possession of acceptable evidence that he has successfully completed the equivalent of a four-year university course in a recognized university, college or other institution of learning, with some training or experience in the field of activity which he desires to pursue. Equivalent experience may be substituted for the university training in the case of candidates who are otherwise specially well qualified.

8 255.1 Type of fellowships.

Fellowships shall be of the combined intern-training and training-in-research type, and may include any or all of the following courses:

(a) Orientation courses consisting of lectures and conferences at the National Institute of Standards & Technology pertaining to laboratory standardization and testing.

(b) Practical laboratory training in various branches of physics, chemistry, and engineering research, under the direction of the National Institute of Standards & Technology, which will include the usual subdivisions of physics (weights and measures, heat, optics, mechanics, atomic physics, electrical measurements and radio) and also technologic applications in research and testing on metals, rubber, leather, paper, textiles, plastics, and clay and silicate products.

(c) Observation and study in such other laboratories within the continental United States as may be selected by the Director of the National Institute of Standards & Technology.

(d) Courses of instruction or research assignments supplementing the practical laboratory training, in universities or colleges selected by the Director of the National Institute of Standards & Technology. 113 FR 8374. Dec. 28. 1948. as amended at 55 FR 38315, Sept. 18, 1990)

8255.3 Award of fellowships.

Fellowships shall be awarded by the Director of the National Institute of Standards & Technology, with the approval of the Secretary of Commerce and the Secretary of State, or the duly authorized representative of the Secretary of State. Applications shall be transmitted to the Secretary of State by the government of the American republic of which the applicant is a citizen through the American diplomatic mission accredited to that government. [13 FR 8374, Dec. 28, 1948, as amended at 55 FR 38315, Sept. 18, 1990)

8255.4 Allowances and expenses.

Allowances and expenses shall be as provided in State Department regulations given in 22 CFR Part 61, and as

provided in Department of Commerce amount originally authorized for Administrative Order No. 202–3. 1

monthly allowances and other expenses

may also be amended, if necessary, 8255.5 Progress reports.

with the approval of the Secretary of Applicants awarded fellowships under Commerce and the Secretary of State, the regulations in this part shall sub- or the duly authorized representative mit written reports of progress in of the Secretary of State. training and research at such intervals

(13 FR 8374, Dec. 28, 1948, as amended at 55 as the Director of the National Insti FR 38316, Sept. 18, 1990) tute of Standards & Technology may determine.

PART 256_RESEARCH ASSOCIATE [13 FR 8374, Dec. 28, 1948, as amended at 55

PROGRAM FR 38316, Sept. 18, 1990)

Sec. 8 255.6 Duration of fellowships.

256.1 Introduction. Fellowships may be awarded for peri

256.2 The Research Associate Program. ods of varying length, not exceeding

256.3 Procedure.

256.4 Qualifications. one 12-month period of actual training

256.5 Duration of projects. and research and may be extended for 256.6 Information concerning the Research not exceeding the same periods in the

Associate Program. manner prescribed under $255.3 and

AUTHORITY: 27 Stat. 395, 31 Stat. 1039; 20 subject to the availability of appro

U.S.C. 91. priations. Fellowships may be can

SOURCE: 32 FR 10252, July 12, 1967, unless celled for cause by the Director of the

otherwise noted. National Institute of Standards & Technology, with the approval of the

EDITORIAL NOTE: Nomenclature changes to Secretary of Commerce and the Sec

part 256 appear at 55 FR 38316, Sept. 18, 1990. retary of State, or the duly authorized

8 256.1 Introduction. representative of the Secretary of State.

This part states policies and proce

dures concerning the Research Asso[13 FR 8374, Dec. 28, 1948, as amended at 55

ciate Program at the National InstiFR 38316, Sept. 18, 1990)

tute of Standards & Technology. In the 8255.7 Official notification.

exercise of its functions as a major sci

entific agency of the Federal GovernEach applicant selected by the Direc

ment, the National Institute of Standtor of the National Institute of Stand ards & Technology may make its faciliards & Technology and approved by the ties available to persons other than BuSecretary of Commerce and the Sec reau employees to work with scientists retary of State, or the duly authorized and engineers in collaborative research representative of the Secretary of aimed at furthering the Nation's sciState, shall be notified of his award entific, industrial, and economic through diplomatic channels. The noti- growth. Such cooperative programs fication shall state the duration and may be sponsored by professional, techtype of fellowship, outline the program nical, or industrial organizations or asof training and research, and state the sociations. Such participants, when so allowances authorized: Provided, how- sponsored, are designated “Research ever, That the Director of the National Associates". Institute of Standards & Technology may subsequently amend the program

8256.2 The Research Associate Proand duration of the fellowship if in his

gram. opinion such action would be in the in The Bureau provides its facilities, terest of obtaining training and re- scientific competence, and technical search better suited to the needs and supervision for defined scientific or capabilities of the fellow than those technical research by a Research Assoprescribed in the notification. The ciate when such research is com

plementary to and compatible with sci1 Not filed with the Office of the Federal entific or technical research being perRegister.

formed or to be undertaken by NIST

« AnteriorContinuar »