...broad list of semi-finished and finis ducta specified in paragraph 304 were reduced a Previous rate Steel ingots, cogged Ingots, blooms and slabs by whatever process made; die blocks or blanks; billets and bora, whether solid or hollow (except hollow bars and hollow drill steel); shafting; pressed, sheared,...

...¡t Total Canada > DIE BLOCKS OR BLANKS; SHAFTING! PRESSED, SHEARED. OR STAUFÏD SHAPES NOT AH ANCED IN VALUE OR CONDITION BY ANY PROCESS OR OPERATION SUBSEQUENT TO THE PROCESS OF STAMPING; ПАШЕН MfLDS CR WAGED STF.SL; CUNBARREL MOLDS NOT IN BARS! ALL DESCRIPTIONS AND SHAPES OP DRY SAND,...

...aluminum, not less than 18 jier centum of silicon, and not less than IS per centum of manganese. 304 Steel ingots, cogged ingots, blooms and slabs, by...gun-barrel molds not in bars: concrete reinforcement burs; all descriptions and shapes of dry sand, loam, or ironmoldeil steel castings; sheets and plates...

...aluminum, not less than 18 iier centum of silicon, and not less than 18 per centum of manganese. 304 Steel ingots, cogged ingots, blooms and slabs, by...bars, whether solid or hollow ; shafting ; pressed, sheaved, or stamped shapes, not advanced in value or condition by any process or operation subsequent...

...pressed, ' she Ted, or stamped nlrtpos, not advanced in vfiluc or condition by any process or opnr-.tion subsequent to the process of stamping; hammer ' molds or swaged steel; gun-barrel molds not in bars; all dcscriptic.ts and shipes of dry sond, loon, ori iron molded •steel castings; all . . the fbrecoing—...

...and by plaintiffs alternative claim alleging paragraph 304, the provisions of which read: PAR. 304. Steel ingots, cogged ingots, blooms and slabs, by...molds or swaged steel; gun-barrel molds not in bars; alloys not specially provided for used as substitutes for steel in the manufacture of tools; all descriptions...

...above 1% cents per pound- Valued above 1# and not above 2}£ cents per pound. Die blocks or blanks; shafting; pressed, sheared or stamped shapes, not...molds or swaged steel; gun-barrel molds not in bars; all descriptions and shapes of dry sand, loam, or iron molded steel castings; sheets and plates and...

...brief, the claims relied upon are that slides or buckles are dutiable at 15 per cent ad valorem as "pressed, sheared, or stamped shapes, not advanced...or operation subsequent to the process of stamping" under paragraph 110; that the buttons are dutiable at 15 per cent ad valorem under paragraph 151 as...

...provision for "pressed, sheared, or stamped shapes " has been qualified by the addition of the clause "not advanced in value or condition by any process...operation subsequent to the process of stamping." This is in fact the very limitation applied by the board to the provision as it read in the old act....

...tapered or beveled bars; mill shafting; pressed, sheared, or stamped shapes, not advanced in valueor condition by any process or operation subsequent to...process of stamping; hammer molds or swaged steel; gun-barrol molds not in bars; alloys used as substitutes for steel in the manufacture of tools; all...