 ... feet, divide each depth into four equal parts ; then measure the inside horizontal breadth at each of the three points of division, and also at the upper and lower points of the depth extending each measurement to the average thickness of that part...  Report of the Annual Meeting - Página 88por British Association for the Advancement of Science. Meeting - 1858Vista completa - Acerca de este libro
 | Edward Norman Lewis - 1885 - 568 páginas
...Thickness of the Ceiling which is between the Bilge Planks and Limber Strake ; then, if the Depth of the Midship Division of the Length do not exceed Sixteen...Thickness of that Part of the Ceiling which is between the Points of Measurement; number these Breadths from above (ie, numbering the upper Breadth One, and so... | |
 | North-east coast institution of engineers and shipbuilders, Newcastle-upon-Tyne - 1892 - 558 páginas
...planks and limber strake ; then, if the depth at the midship division of the length do not exceed 16 feet, divide each depth into four equal parts ; then...thickness of that part of the ceiling which is between the points of measurement ; number these breadths from above (ie, numbering the upper breadth one, and... | |
 | Reed Thomas and co, ltd - 1885 - 464 páginas
...points of division, and also at the upper and lower points of each depth, each measurement extending to the average thickness of that part of the ceiling which is between the points of measurement. The areas of the transverse sections are then computed by Simpson's first rule,... | |
 | Great Britain - 1886 - 792 páginas
...deducting the average thickness of the ceiling which is between the bilge planks and limber strake ; then, if the depth at the midship division of the...thickness of that part of the ceiling which is between the points of measurement ; number these breadths from above (ie, numbering the upper breadth 17 & 18 VICTORIA,... | |
 | Great Britain - 1889 - 352 páginas
...deducting the average thickness of the ceiling which is between the bilge planks and limber strake ; then, if the depth at the midship division of the...thickness of that part of the ceiling which is between the points of measurement; number these breadths from above (ie, numbering the upper breadth one, and so... | |
 | Great Britain - 1895 - 800 páginas
...provisions of this Act in the case; of a ship constructed with a double bottom for water ballast) (/) ; then if the depth at the midship division of the length...thickness of that part of the ceiling which is between the points of measurement; number these breadths from above (ie numbering the upper breadth one, and so... | |
 | United States - 1895 - 504 páginas
...deducting the average thickiiess of the ceiling, which is between the bilge-planks and limber-strake: then, if the depth at the midship division of the...thickness of that part of the ceiling which is between the points of measurement; number these breadths from above, numbering the upper breadth one, and so on... | |
 | United States - 1895 - 468 páginas
...deducting the average thickness of the ceiling, which is between the bilge.planks and limber.strake; then, if the depth at the midship division of the...thickness of that part of the ceiling which is between the points of measurement; number these breadths from above, numbering the upper breadth one, and so on... | |
 | United States - 1899 - 522 páginas
...deducting the average thickness of the ceiling, which is between the bilge-planks and limber-strake; then, if the depth at the midship division of the...thickness of that part of the ceiling which is between the points of measurement; number these breadths from above, numbering the upper breadth one, and so on... | |
 | United States. Department of the Treasury - 1900 - 810 páginas
...breadth, at each of the three points of division, and also at the upper and lower points of the depths, extending each measurement to the average thickness of that part of the ceiling which is between the pointsof measurement; number these breadths from above, numbering the upper breadth one, and HO on... | |
| |
